Chrome is well known for its excellent properties whereby it has versatile applications and is ideal as protective and decorative coating. It is recommended for parts subject to strong corrosion, abrasion and wear. Chroming is used for steel and grey iron casting, but is also suitable for copper alloys.
Decorative chroming is a process where a thin chromium top layer is applied to the nickel or copper-nickel base layer. Chrome plays a dual role here, because it does not only increase corrosion resistance, but prevents the matting of the nickel coating. The result is an attractive, glossy finish resistant to outdoor temperature fluctuation and condensation. Decorative chroming is mainly used for bathroom equipment as well as car and motorbike parts. We use decorative chroming. The chrome (III) plating technology is environmentally friendly and contains no carcinogens. It grants more even coating and also fulfils the RoHS directives of the EU.
Chroming is carried out in hanging a process. In this process, the parts are clipped on or tied to the fixtures. The fixtures ensure stable hanging and good contact. We regularly maintain our fixtures to ensure a permanently attractive finish.
Az általunk alkalmazott króm 3 technológia környezetbarát, rákkeltő anyagokat nem tartalmaz. It provides a more uniform coverage and complies with the EU RoHS directive.
Our baths are 800 mm long, 500 mm high and 250 mm wide. We developed our electroplating tools to ensure easy handling and utilise the available space best to offer you a cost efficient
solution.
There are still misconceptions that chrome plating is just a matter of placing the workpiece to be chrome plated in the plating bath and then finishing it off by depositing the chrome.
Chrome plating, and all other surface treatment technologies, have a preparation phase during which the surface of the workpiece is cleaned of all contaminants such as rust, revel and sanding paste residues. The aim is to ensure that the surface is metallically clean and that the coating is applied evenly to the work surface to be electroplated. If required, we can also carry out the sanding, which is an important aspect of the pricing. In summary, the price of chrome plating is influenced by the preparation stage and the need for sanding.
Our technology allows chromium plating on the following materials : iron, brass, zamak, steel. The price of chrome plating may vary for different materials, as the thickness of the required coating (copper – nickel – chrome) may differ for certain materials.
The price of chrome plating depends on the size of the workpiece surface, not the weight of the workpiece. Our tubs measure 800 X 500 X 250 mm. Depending on this, we can chrome any workpiece within this range that can be placed horizontally or diagonally in the bath. For more complex surfaces we can only calculate the price of chrome plating on the spot, in other cases it is sufficient to send us the exact dimensions by e-mail or the parameters of the part (to the millimetre) on the Ask for a Quotation page, so that we can calculate the price of chrome plating for you.
Another important consideration is the environment in which you intend to use the workpiece to be chrome plated. Different coating thicknesses (copper – nickel – chrome) are recommended for indoor and outdoor environments, and humidity also has a big influence on the choice. For example, a much thicker coating will be required in a humid outdoor environment than in a dry indoor environment.
The prices shown are for information only! To request an exact quotation, please specify the exact dimensions, material, condition of the workpiece to be chromed and the environment in which you intend to use the item.
Moped parts
Moped wheel
10 – 12 000 Ft
Moped rim
34 000 Ft
Moped tank
60 000 Ft
Bike parts
Front fork, steering tube (560 mm long, 22.5 mm diameter (ø))
30 000 Ft
Handlebar (length 120 mm, ø 30 mm)
30 000 Ft
Saddle tube (400 mm long, 24 mm ø)
30 000 Ft
Other
2 (8×8 mm) L-shaped 1 mm thick laser cut S235 plates, 567 mm long)
4000 Ft
Snap-on handle (165 mm x 75 mm)
1400 Ft
Soap dish ( 230 mm x 60 mm, overall 320 mm)
6000 Ft
Bathroom tap (depending on size)
5-6000 Ft
The prices shown include complete backfiring, copper-nickel-chrome plating and mirror polishing.
The minimum price is 3000 Ft.
Our specialists are at your disposal to present even more advantages of chrome plating and the professional chroming procedure at Cromkontakt Kft. Our team will certainly give you a favourable offer. Discover our expertise and outstanding quality for yourself, seek our professional advice and let’s choose the most suitable surface treatment process for you.
Learn more, contact us!
Your reliable partner for galvanizing!
Monday – Friday: 7:00 – 15:00
Bank account: CIB 10700615-71255437-51100005
Tax number: 13316570-2-42
Rn.: 01-09-729017
Copyright © All rights reserved! Cromkontakt Kft. 2004 – 2024